Corten Steel Water Block

• 3mm thick Corten steel construction
• Integrated LED lights and water fountains
• 10m cable length
• Hard-wearing, weatherproof, low-maintenance and durable
• Delivered without rust. The Corten steel rusting process takes about 4-5 months, depending on weather conditions
• EU plug, UK adaptor
• Custom sizing available

• 5-year structural guarantee
• Water pump 2-year guarantee
• LED lights 1-year guarantee

Available in two standard sizes

Square Water Block

• Above ground block W 700mm x D 700mm x H 700mm
• Underground-reservoir H 380mm x W 1100mm x D 1100mm

Rectangular Water Block

• Above ground block D 700mm x W 3000mm x H 700mm
• Underground-reservoir H 380mm x W 3400mm x D 1100mm

Netherlands

Nationwide delivery within 14 days. Please check availability before ordering.

Free national kerbside delivery within the UK mainland. Please note, for products over 2.3m in length, the client is responsible for unloading at the point of delivery. Please refer to our deliveryterms and conditions.

1. Dig a hole in the ground at least as big as the base of the
   water block. The depth depends on the height of the base of
   the water block and the thickness of the foundation it sits on.
2. Place a solid and level foundation at the bottom of the hole.
   Make sure there is an opening in the centre through which the
   power cables and water drainage can run.
3. Next place the base of the water block on the foundation and
   place the pump inside.
4. Lay the top of the water block on its side next to the base so
   the hose from the fountain can be connected to the pump.
5. Then run the pump and fountain power cord through the
   overflow and out from under the water block.
6. Cover the base of the water block with gravel, it completely
   disappears from view and the water seems to run straight into
   the ground

We’re constantly finding new ways to become more sustainable, so we only select products that are built to last.

• The product should be unpacked immediately upon delivery to release any moisture trapped inside the packaging. If the product is left in its packaging, it may develop uneven rust patches.
• Water features should be installed on a firm, level surface.
• The weathering process may cause rust run-off.
• The guarantee expires if you drill or grind in a way that is not specified.
• The water used in this product should have a neutral pH value (7) to protect the look and quality of the material.
• Clean annually by spraying coarse dirt off the product with tap water.

We recommend looking after your Corten steel water feature correctly to increase its lifespan. Click here to read our guide on cleaning and maintaining water features. 

Returns must be completed within 30 days from the delivery date. Orders cannot be cancelled prior to delivery. The client is responsible for the cost of returning any item, this is non-refundable. Bespoke made-to-order products are not eligible for return or exchange. Please refer to our Terms and Conditions.